Macsa SPA C
Laat de laser meegroeien met het bedrijf
De eerste codeer- en markeer laser die mee kan groeien met de ambitie van de onderneming. De nieuwe SPA laser techniek van Macsa maakt alles eenvoudiger: het modulaire ontwerp stelt u in staat de huidige en toekomstige codeerwensen van de productie lijnen aan te passen. Het is een waardevolle investering die altijd aanpasbaar is
Choose your MACSA in simple steps:
CHOOSE THE TECHNOLOGY
• The substrate you need to code, mark or score determines whether you need a CO2, a YAG or a fiber laser.
• If it’s a CO2 laser you can also choose the wavelength to better mark PET and PVC.
• CO2: Paper and board, glass, wood, PVC (10,2 micron), PET (9,3 micron).
• YAG and fiber: Metals,engineering thermoplastics, styrenics olefinics, epoxy resins plastic films (continuous fiber)
CHOOSE THE POWER
• A range of laser powers is available for all SPA families.
• Typically a higher speed application will need a higher power laser.
• Some more difficult to mark substrates will also need a higher power laser.
CHOOSE THE PRINTHEAD
• If it’s a high speed and/or multi line and/ or complex graphic application you need an SPA UHS laser.
• If it’s a difficult to mark substrate or a scoring application you need an SPA HPD laser.
• For most other applications an SPA NXT laser is sufficient.
• UHS: High speed production lines; large, more complex graphics.
• HPD: Scoring applications; difficult to mark substrates.
• NXT: Moderate speed production lines; typical coding messages.
CHOOSE THE OPTICS
• The size of the message or graphic determines the focal length of the lens to be used.
• A beam expander may also be chosen to improve print quality.
• Beam expanders are standard for UHS
CHOOSE THE ENCLOSURE
• All SPA lasers are designed, built and tested to IP54.
• An IP65 option is available for users with damp and/or wash down environments.
• High and low temperature kits are available to ensure reliable operations at extreme temperatures.
• An optical head split kit aids installation in difficult environments and HPD lasers.
• A focussing pointer is also available.
3D printing options are available as extras
CHOOSE THE CONTROLLER
• The easiest way to program and control an SPA laser is to use its handheld touchscreen controller.
• Alternatively you can use Marca software and drive it from a PC via an ethernet link.
Specificaties
Kenmerken | Model specificaties |
---|---|
Laserbron | CO2 |
Licht golflengte | 10.6 u micron |
Vermogen | 10-3-100-200 Watt |
Codeer modus | Statisch en dynamisch |
Afmetingen | |
SPA C
Hier komen (eventueel) printervoorbeelden.
Overige Macsa laser coderen systemen

Macsa Icon 2
- Compacte laser
- CO2 laserbron
- 10 of 30 Watt
- 35 x 35 mm lens
- Karton, Glas, Kunststof